FR Conversions
FR Conversions Wheelchair
Accessible Vans
U.S.-made, crash-tested, and built to last. FR Conversions rear-entry and side-entry minivan conversions on the Toyota Sienna and Chrysler Pacifica — engineered for individuals, fleets, and commercial transport operations.
FR Conversions was founded on a simple idea: the mobility industry wasn't building accessible vehicles to the standard that passengers and operators actually deserved. With vertically integrated U.S. manufacturing, rigorous crash testing, and a relentless focus on durability, FR set out to change that. Every vehicle exits Westminster, Maryland with wider openings, higher payload capacity, and better corrosion protection than the category standard. Mobility Express is proud to carry FR Conversions — available to customers across Florida and nationwide.
FR Conversions in Action
See the quality and accessibility features that set FR apart. Replace these image placeholders with your own FR Conversions vehicle photos.
Rear-Entry & Side-Entry Minivan Conversions
FR builds on Toyota Sienna and Chrysler Pacifica/Voyager platforms with three cut configurations to meet the needs of individual owners and commercial fleet operators.
Rear-Entry Minivans
Accessible, dependable, and built for both personal and fleet use. Accommodates 1 to 2 wheelchairs. Optional stretcher configuration available. Available on Toyota Sienna and Chrysler Pacifica/Voyager.
Toyota Sienna Chrysler Pacifica Short Cut Long CutSide-Entry Minivans
High-quality, durable conversions engineered for taxi fleets, transit agencies, and operators who need fast, convenient side-door wheelchair access. Available in long cut configuration.
Toyota Sienna Chrysler Pacifica Side-Entry Long CutRear-Entry Hybrid Minivans
Maximize value and efficiency with a hybrid-electric platform. Same reliable FR conversion features combined with lower fuel costs — ideal for high-mileage fleet environments.
Toyota Sienna Hybrid Rear Entry Fleet ReadyWhat Sets FR Conversions Apart
From ramp design to undercarriage coating, every detail is engineered for long-term durability and reliability in demanding real-world conditions.
-
Widest Available Ramp Opening FR builds vans with the widest opening and largest payload capacity the chassis will accommodate — no one who needs a ride gets left behind.
-
No-Rattle Ramp System A unique ramp securement system eliminates noise and vibration during transit. Spring-assisted and fully manual — no motor to fail or replace.
-
Proprietary Non-Slip Flooring Durable, even non-slip flooring material ensures traction in any weather. Easy to clean and engineered to last through high-cycle commercial use.
-
Best-in-Class Corrosion Protection All conversion parts are powder coated. An innovative rust coating applied to the undercarriage eliminates corrosion threats and extends vehicle life beyond industry averages.
-
Drives Like a Stock Van FR conversions are engineered to retain OEM-quality driving dynamics. Smooth, easy to maneuver, with no unusual handling characteristics introduced by the conversion.
-
Quick Loading & Unloading Designed for fast, efficient boarding — important for both personal use and high-turnover fleet environments like medical transport, transit, and rideshare.
Standard on Every FR Conversion
FR Conversions conducts all five-side crash tests on a single vehicle — not separate units as is industry practice. Every conversion ships with documentation confirming NHTSA registration, NMEDA MQAP certification, and ADA compliance.
Extended warranties and factory engine/transmission warranties (up to 5 years / 100,000 miles) are also available through authorized dealers.
FR Rear-Entry Conversion Specifications
Key access and conversion measurements for the FR rear-entry minivan platform. Specifications may vary by chassis, cut, and configuration. Contact Mobility Express to confirm your specific build.
| Specification | Value |
|---|---|
| Available Platforms | Toyota Sienna, Chrysler Pacifica, Chrysler Voyager |
| Entry Type | Rear-Entry, Side-Entry |
| Available Cuts | Short Cut, Long Cut, Side-Entry Long Cut |
| Wheelchair Capacity | 1 to 2 wheelchairs (rear-entry) |
| Ramp Type | Spring-assisted manual ramp |
| Motor / Electronics | 100% manual operation — no motor to service or replace |
| Ramp Width | Widest available opening for the chassis |
| Flooring | Proprietary non-slip, easy-clean material |
| Undercarriage Protection | Rust-resistant coating (industry-leading corrosion protection) |
| Conversion Warranty | 3 years / 36,000 miles standard; extended available |
| Engine/Trans Warranty (optional) | 5 years / 100,000 miles (factory enhanced) |
| Crash Testing | 5-side FMVSS crash tested on a single vehicle |
| Lead Time | 4 to 6 weeks average; expedite available |
| Manufacturing Location | Westminster, Maryland, USA |
Specifications are for reference only and may vary due to chassis, trim level, cut selection, and optional equipment. Contact Mobility Express to confirm your specific configuration.
OEM Vehicle Features
FR conversions build on Toyota Sienna and Chrysler Pacifica platforms. Below are representative standard features by platform.
Toyota Sienna
- 2.5L hybrid powertrain (standard on all Siennas), 36 MPG city est.
- All-wheel drive standard on most trims
- Tri-zone automatic climate control
- Power sliding rear doors (both sides)
- Pre-Collision System with Pedestrian Detection
- Lane Departure Alert with Steering Assist
- Automatic High Beams
- Rear cross-traffic alert and backup camera
- 8-inch multimedia touchscreen with Apple CarPlay / Android Auto
Chrysler Pacifica / Voyager
- 3.6L Pentastar V6 engine or Plug-in Hybrid (Pacifica)
- 9-speed automatic transmission (Pacifica)
- Tri-zone automatic climate control (Pacifica Limited)
- Power sliding doors with hands-free sliding door capability
- Forward collision warning with automatic braking
- Blind spot monitoring and rear cross-path detection
- 10.1-inch Uconnect touchscreen (Pacifica)
- Wireless Apple CarPlay / Android Auto
- Rear backup camera standard
Certifications & Standards
FR Conversions holds more certifications than any comparable manufacturer in the category. Every vehicle is built to exceed the standards others simply meet.
Request Pricing & Availability
Ready to configure your FR Conversion? Contact a Mobility Express specialist to confirm current inventory, platform options, cut selection, and pricing.
FR Conversions Inquiry Form
What Our Customers Say
Andrew was very attentive to my special needs and understood the importance of my independence. I love the van he sold me!
David Rached thoroughly explained each step in the process, tracked every detail, and kept us well informed. Everyone at Mobility Express was very knowledgeable.
We have purchased a wheelchair accessible van, stair lift, and a lift chair over the past few years. In each case, the service was outstanding. Highly recommended!