Pride Go Go Carbon [Model # SC25M]
Special Price
$3,199.00
was
$4,789.00
With its full carbon fiber frame, the Go Go® Carbon delivers outstanding portability in a four-wheel scooter. Weighing only 35 pounds without the (lithium) battery, it folds effortlessly in seconds for easy transportation and storage. It can even be towed like a suitcase, making it ideal for navigating airports and other busy settings. The Go Go Carbon folds up in no time—just pull the handle at the base to bring the scooter's front and rear sections together. It securely locks into its folded position, allowing you to easily store it or tow it behind you. No need to fret—it unfolds just as quickly and effortlessly.
Go Go Carbon
FDA Class II Medical Device1
| CATEGORY | SPECIFICATION |
|---|---|
| Model1 |
Go Go® Carbon
|
| Model Number |
SC25M
|
| Weight Capacity | 300 lbs. |
| Turning Radius | 53" |
| Overall Width3 | 17.5" |
| Overall Length3 | 40.3" |
| Maximum Speed2 | Up to 3.7 mph |
| Ground Clearance3 | 1.5"at motor |
| Front Wheels | 7" solid |
| Rear Tires | 8" solid |
| Number of Tires | 4 |
| Drivetrain | Rear wheel drive, sealed transaxle, 24-volt brushless |
| Braking System | Regenerative and electromechanical |
| Suspension Type | NA |
| Seat Sizes | 14"W x 11.5"D |
| Seat-to-Floor-Range | 21.75" |
| Per Charge Range13,5 | Up to 10 miles |
| Standard Electronics | 30A Brushless controller |
| Component Weights6 | 35 lbs. without battery With battery: 39 lbs. |
| Battery Requirements4 | 24V, 12Ah lithium battery |
| Battery Charger | 24V, 2A |
| Warranty | Frame: lifetime limited; Drivetrain: 1-year; Electronics: 1-year; Battery: 1-year |
| Notes: 1 1This product is a FDA Class II Medical Device designed to aid individuals with mobility impairments. 2 Varies with user weight, terrain type, battery amp-hour (AH), battery charge, battery condition and tire condition. These specifications can be subject to a variance of (+/- 10%). 3 Due to manufacturing tolerances and continual product improvement, this specification can be subject to a variance of (+ or - 3%). 4 AGM or gel cell type required. 5 Tested in accordance with ANSI/RESNA, WC Vol2, section 4 & ISO 7176-4 standards. Results derived from theoreticl calculations based on battery specifications and drive system performance. Test conducted at maximum weight capacity. 6 Battery weight may vary based on manufacturer. |
|
Attachment not available
Warranty information will be updated soon